Application of non-woven fabric in automobile rubber products

With the rapid development of the national economy, my country's rubber industry has undergone earth-shaking changes. Non-woven fabric is an ideal reinforced framework material, which can improve the technical performance and use performance of rubber products. This article adds a brief introduction to this.

1.Application in automotive rubber sheet
The amount of rubber sheet for each car is 2.5-3.0 m2. The use of non-woven fabric as a rubber skeleton reinforcement material changes the extensibility of the rubber product, improves the product's tensile strength, breakdown resistance and tear strength, and has low cost and good performance. Now buses, locomotives, trucks, and cars all use a large number of non-woven composite rubber products.

2. The application in automobile mudguards
The non-woven fabric and modified rubber are used to compound to make a composite fender. This new fender increases the strength and folding resistance during use, and overcomes the brittle cracking phenomenon that exists in winter. Very ideal.

3. Application in car tire repair pads

Currently, automobile tire repair pads made of non-woven fabric and modified rubber are used. Because the tire repair pad is compounded with high-strength, high-density non-woven fabric, the quality of tire repair is significantly improved, the repair is quick, the cost is low, the effect is

4.the application in automobile rim sheath
Cars often use rubber protective covers near the steel rims. Using non-woven fabric and rubber composite steel ring sheath, the burst strength is 3 times larger than that of ordinary rubber sheath, the wear resistance is enhanced, and the service life is extended by 5-8 times. It has been generally accepted by users.

5. Application in the connecting ring of automobile steering gear
Many parts of the car need to use connecting rings. After using non-woven composite connecting rings, its flexural performance and tensile strength are improved, which fundamentally solves the problem of easy breakage of the connecting ring, and its service life is improved by 5- 8 times.

6. Application in rubber sealing strips
Traditional rubber sealing strips have low tensile force, poor breakdown resistance, low fatigue resistance, and easy deformation, which often brings users a lot of trouble. Since the composite sealing strip is well formed, its tightness can meet the requirements of different conditions, the sealing degree is quite ideal, and the cost only increases by 10%-12%.
VII. Application in rubber floor tiles
Fibre floor panels have high static electricity; polyurethane foam floor panels are easy to move; PVC floor panels do not meet indoor environmental protection standards. Non-woven fabric and modified rubber composite floor tiles (floor tiles) overcome the defects of the above floor tiles. As a framework material, non-woven fabric has greatly improved its dimensional stability and various indicators. It is a new product developed by high-tech means.